SIGNATURE Series
MORE THAN JUST A WATER SOFTENER
Remove Chlorine and Improve the Taste of Your Water

FEATURES WS-30-S
Saves on salt and water usage Solid state microprocessor with easy access front panel settings
Regenerates on demand - based on water usage
Double backwash ability, offers optimum regeneration, efficiency and cleaning ability
Carbon mixed bed for chlorine removal
Counter current (up-flow) regeneration
Capacitor
back-up with two hour power carry over
12 volt transformer
provides safe and easy installation
Washed quartz underbedding
- does not impart hardness into softened water
Safety
float brine valve assembly that prevents salt tank overflows
Full
one inch diameter riser tube
Pol-E-Wound fiberglass
resin tanks to provide superior strength - does not deteriorate, rust or corrode
.
.
SPECIFICATIONS WS-30-S
Efficiency Gr/Lb Salt | Capacity in Grains | Flow Rate (gpm) | Max.
Iron (ppm) | Water Used/ Regen | Quartz UnderBed (lbs) | Resin Quantity (cu. ft) | Carbon Quantity (lbs) | Pipe
Size In/Out | Mineral Tank | Brine Tank | Overall Height |
5419 | 30,000 | 10 | 1 | 37 | 12 | 1.00 | 18 | 1" | 10"x54" | 18"x30" | 61.5" |
If chlorine
in your water is an issue, 30,000 grain only. Uses only 37 gallons of water per regeneration.
**Comes with all the other similar features and benefits as the Premier but will also remove the chlorine,
improve the taste and removes odors all through the house.
If Clorine is an issue and you already have a working softener check out our Declorinator Model.